Документы
| Data sheet.pdf |
| Safety data sheet.pdf |
Rebound / Силикон
| Артикул: | |
| EAN: | |
| Бренд: | Smooth-On |
| Mixed viscosity: | Brushable |
| Pot life: | 20 минут |
| Cure time: | 6 часов |
| Mix ratio by volume: | 1A:1B |
| Mix ratio by weight: | 1A:1B |
| Температура хранения: | ~ 23°C |
Rebound™ 25 and 40
Rebound™ silicone rubbers are easy-to-use platinum-cure silicone rubbers which self-thicken for making brush-on molds of almost any model. Rebound™ can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber
3 to 4 layers are all that is necessary to make a strong, durable production mold for casting wax, gypsum, concrete (GFRC) or resins (urethane, polyester, etc.)
Features:
- Rebound™ 25 is soft, flexible and is good for making molds of models with deep undercuts. Depending on model configuration, Rebound™ 25 can be inverted as a glove molds
- Rebound™ 40 is harder and less flexible
- These products are compatible. For example, you can apply two coats of Rebound™ 25 and back it up with two coats of Rebound™ 40
Read the data sheet before You begin!
More videos:
How to make a silicone mold for woodgrain concrete using Rebound 25:
https://youtu.be/VzImMAOZ8Fc
How to make a rock mold for a concrete sink:
https://youtu.be/bPvgiE5jrbA
Mold making tutorial: making a silicone brush on mold:
https://youtu.be/ZCIO_2J1gF0
Mold making tutorial: how to make a brush-on rubber mold of a bust:
https://youtu.be/sOyBawt1-Ec
Mold making & casting calculators:
https://www.smooth-on.com/support/calculators/
